Chair.rar ❲FAST❳

: Flip the chair over and give it a test rock. If it feels wobbly, slightly loosen the runner screws, let the chair settle on a flat surface, and then re-tighten everything. Maintenance Tips

: Place the assembled wire-and-runner base onto the bottom of the seat shell. Align the four holes in the base with the shock mounts.

Tip: Do not tighten completely until both runners are aligned to ensure the chair rocks evenly. Chair.rar

: The rocking motion can cause screws to loosen over time; check them every few months.

The (or Eames RAR ) is a design classic known as the Rocking Armchair Rod Base . Whether you have an original Vitra/Herman Miller or a high-quality replica, the assembly generally follows a simple four-part process. 1. Inventory Check Before starting, ensure you have the following components: 1x Seat Shell: Usually molded plastic or fiberglass. 1x Eiffel Base: The wire "rod" structure. : Flip the chair over and give it a test rock

: Flip the wire Eiffel base upside down. Align the pre-drilled holes in the wooden runners with the brackets at the bottom of the base. Secure them using the provided screws.

: Insert the four main screws through the base into the seat shell. Tighten them in a diagonal pattern (like lug nuts on a car tire) to ensure even pressure and prevent the shock mounts from pulling. Align the four holes in the base with the shock mounts

Typically made of maple or walnut. 4x Screws & Washers: To attach the base to the shell. 4x Screws: To attach the runners to the base. Allen Key/Wrench: Often included in the kit. 2. Step-by-Step Assembly