How To Fit A Log Burner -

I can also provide a detailed breakdown of the necessary for your specific setup. How To Have a Log Burner Without a Chimney | Stoves Are Us

Stoves over 5kW often require a permanent air vent in the room to provide oxygen. 2. Selecting the Site and Unit

Your installer will perform a smoke test to ensure the flue is drawing properly and that there are no leaks. how to fit a log burner

If using an old chimney, it must be cleared and checked for damage. A flexible stainless-steel liner is usually necessary for safe venting.

Place the log burner on the hearth, ensuring it is level. I can also provide a detailed breakdown of

Lay a non-combustible hearth (slate, concrete, stone). It must be at least 12mm thick, extending 300mm in front and 150mm to each side of the burner.

Use a twin-wall insulated flue system that passes through an external wall or roof. Selecting the Site and Unit Your installer will

Install a chimney closure plate to seal the fireplace opening, preventing soot from entering the room.